Insulation for external thermal insulation

ISO V-shaped bottom hem – Pack of 4

Name: ISO Bottom Bead, Part V – Pack of 4, External Thermal Insulation Cladding (ITE) Flap
SKU: A130577
Price: 23.99 EUR
Availability: InStock

Isolant pour ITE Th31 en PSE gris épaisseur 100 mm - 3,60m²/paquet

Ref. A130577

Prix :

23,99 € Including VAT

19,99 € Excl. VAT

Demande de devis

Description

The ISO bottom strike plate (part V) is a hardware accessory that complements part P, designed to ensure the bottom closure of espagnolette-style casement shutters on externally insulated façades. It is supplied in packs of 4. Its black finish and design specifically tailored for external wall insulation make it an essential component for ensuring the shutters close properly once the insulation and external render have been applied.

Technical specifications

Cure :	Mora jêrîn a li gorî ISOyê ji bo panjûrên espanyolî
Referans :	Ode V
Ambalaj :	Pakêta 4'î
Hûrgiliyên dawîn :	Reş
Bikaranîn :	Îzolasyona termal a derve (ETI)

Bottom-hinged espagnolette shutters
External thermal insulation (ETI)
Energy-efficient refurbishment
New-build construction
Exterior joinery

External thermal insulation products

You will also need:

Réf. A130170

Black ISO shutter stop 0/10 – Stop for externally insulated façades

The black ISO 0/10 shutter stop is a hardware fitting designed to provide a stop for swing shutters on a facade with external insulation, for insulation thicknesses of up to 100 mm. Its extra-long shaft allows the stop to be positioned beyond the insulation layer.

Supplied with an anchor plug and an adjustable stop, it can be quickly fitted to standard building supports, ensuring the shutter stops reliably against the finished façade.

6,17 € Including VAT

5,14 € Excl. VAT - VAT 20,00%

Réf. A130000

ISO hinge body Ø25 + key Ø14 – ITE flap offset (max. 160 mm)

The ISO Ø25 hinge body, supplied with a Ø14 mm key, is an offset fitting designed to accommodate swing shutters when installing an external thermal insulation system (ETIS). It allows for insulation thicknesses of up to 160 mm.

This is the standard model in the range, suitable for most common swing shutters; for heavy or double shutters, the reinforced Ø30 version is recommended.

33,00 € Including VAT

27,50 € Excl. VAT - VAT 20,00%

How do you choose the right external insulation?

Stages of an ITE

Which fixing for which surface?

ISO V-shaped bottom hem – Pack of 4

The perfect addition to your shutter fittings on external thermal insulation cladding (ITE) façades

The ISO V-shaped bottom strike plate is a hardware fitting designed for hinged shutters fitted with a espagnolette lock, on façades that have been fitted with external thermal insulation. It complements the P-shaped fitting to ensure a lower locking mechanism tailored to the exact configuration of each shutter. Packaged in packs of 4, this fitting allows for the rapid installation of multiple locking points on a single energy-efficiency renovation site, by selecting either the P or V fitting depending on the geometry of the existing hardware. When used in the correct position, this bottom strike plate helps to restore full functionality to espagnolette shutters following the installation of insulation and façade render, ensuring a finish that is both aesthetic and functional. Its black finish, consistent with the rest of the ISO range of accessories, ensures a discreet integration whilst offering good resistance to the elements. Facade contractors and firms specialising in external thermal insulation will find this V-shaped fitting to be a reliable addition for ensuring the smooth operation of shutter mechanisms, in both new-build and renovation projects.

Our ITE expert’s opinion

This additional component for part P allows the shutter closure to be precisely adjusted to match the exact geometry of the espagnolette. A small accessory that helps prevent many complaints after the work is completed.

External thermal insulation products

Products in the same category:

Réf. 20904Z

40 mm aluminium coping rail – Length 2.5 m

The 40 mm aluminium top rail is a protective profile designed to cover and protect the upper edge of insulation panels where this is not covered by a roof overhang. Designed for insulation 40 mm thick, it is sold in lengths of 2.5 m.

Made from aluminium, its teardrop shape ensures effective drainage of rainwater, thereby providing long-lasting protection for the external thermal insulation system.

23,95 € Including VAT

19,96 € Excl. VAT - VAT 20,00%

Réf. 209053

53 mm aluminium ITE starter rail

The 53 mm aluminium ITE starter rail enables an external thermal insulation project to get off to a smooth start. It ensures that 50 mm insulation panels are held in place and aligned, whilst protecting the lower part of the façade from impact and damp.

9,26 € Including VAT

7,72 € Excl. VAT - VAT 20,00%

Réf. ST211

Orange woven tape ST211 – 48 mm x 33 m

The ST211 orange woven tape is a professional-grade adhesive tape, 48 mm wide and 33 m long, designed for general construction site use: securing protective film on façades, masking, sealing or temporary fixing.

Its strong adhesion and tensile strength make it a practical and reliable tool, whilst remaining easy to tear by hand for quick use on site.

3,70 € Including VAT

3,08 € Excl. VAT - VAT 20,00%

new

Réf. 100383

Unimat Façade Ultra BD 100 mm – Siniat graphite-coated EPS external wall insulation panel, R=3.20

The Siniat Unimat Façade Ultra BD panel, 100 mm thick, is a rigid, graphite-modified (grey) expanded polystyrene insulation board, ACERMI-certified, designed for external wall insulation (EWI) beneath render. Measuring 1200 x 600 mm, it has a thermal resistance of R = 3.20 m².K/W thanks to its thermal conductivity of 0.031 W/(m.K).

Lightweight and easy to cut, this panel is installed by gluing and/or fixing with dowels to masonry and concrete, in both new-build and energy-efficient renovation projects.

10,20 € Including VAT

8,50 € Excl. VAT - VAT 20,00%

new

Réf. 100393

Unimat Façade Ultra BD 180 mm – Siniat graphite-coated EPS external wall insulation panel, R=5.80

The Siniat Unimat Façade Ultra BD panel, 180 mm thick, is a rigid, graphite-modified (grey) expanded polystyrene insulation board, ACERMI-certified, designed for external wall insulation (EWI) beneath render. Measuring 1200 x 600 mm, it has a thermal resistance of R = 5.80 m².K/W thanks to its thermal conductivity of 0.031 W/(m.K).

Lightweight and easy to cut, this panel is installed by gluing and/or fixing with dowels to masonry and concrete, in both new-build and energy-efficient refurbishment projects.

19,72 € Including VAT

16,43 € Excl. VAT - VAT 20,00%

Why choose the ISO V-shaped low-beat part?

Without a suitable bottom strike, the espagnolette lock on the shutter will not close properly after the insulation has been fitted; the V-shaped fitting restores a functional locking point at minimal cost, complementing the P-shaped fitting. ISO bottom rail part V: failure to treat the bottom rail after external wall insulation
Shutter closure: Functional and precise; Significant play, impaired closure
Sealing: Correct; Compromised
Cost: Low (accessory); Risk of having to replace the entire fitting
Packaging: Pack of 4 pieces —

ISO V-shaped bottom hem – Pack of 4

Frequently asked questions about the ISO low-beat V-type valve

Her du perçe misoger dikin ku perde li jêr têkeve lê li gorî mîhengên cuda yên espanyoleta ne; hilbijartin bi geometriya amûra heyî ve girêdayî ye.

Her pakêtek 4 perçeyan dihewîne, ku ji bo çend xalên girêdanê li ser heman şantiyeyekê bes e.

Ew ji bo rûberên derve yên ku bi îzolasyona derve (ETI) hatine pêçan û bi panjûrên espanyolî (espagnolette) ve hatine xemilandin hatiye sêwirandin; berî sazkirinê divê lihevhatina bi pêkhateyên heyî re were kontrolkirin.

ISO V-shaped bottom hem – Pack of 4