LFM 10 hammer-in anchor, 260 mm – Mechanical fixing for external wall insulation

Name: LFM 10 Anchor, 260 mm – Klimas ETA External Wall Insulation Fixing System
SKU: LFM10260KLIMAS
Price: 41.71 EUR
Availability: InStock

Isolant pour ITE Th31 en PSE gris épaisseur 100 mm - 3,60m²/paquet

Ref. LFM10260KLIMAS

Prix :

41,71 € Including VAT

34,76 € Excl. VAT

Demande de devis

Description

The LFM 10 anchor, 260 mm in length, is a mechanical drive-in fastener, comprising a polyethylene body and a galvanised steel nail, designed for the supplementary fixing of insulation boards in external wall insulation systems. It is certified under European Technical Assessment ETA-17/0450. Packaged in boxes of 100 pieces by the manufacturer Klimas France, it is suitable for insulation thicknesses of up to approximately 180 mm on new substrates, and helps to counteract wind suction forces on the insulated façade.

Technical specifications

Hilberîner :	Klimas (marqeya Wkręt-Met)
Berhem :	LFM-10 (LFMG-10)
Cure :	Lengerê çakûçkirî bi mîlê metalî
Tîreya ankora (dk) :	10 mm
Tîreya flanşê (Dk) :	60 mm
Dirêjahiya giştî (La) :	260 mm
Kûrahiya lengeravêtinê ya bi bandor (hef) :	70 mm
Kûrahiya qulkirinê (h0) :	80 mm
Stûriya îzolasyonê ya lihevhatî (nû, bê qul) :	nêzîkî 180 mm
Materyalê laş :	Polîetîlen a virjîn
Materyalê çivîkan :	Polayê galvanîzekirî, serikê bi polîamîd girtî
Nirxandina Teknîkî ya Ewropî :	ETA-17/0450
Ambalaj :	Qutiya 100 perçeyî

Mechanical fixing of external wall insulation panels
Expanded polystyrene (EPS) and extruded polystyrene (XPS)
Mineral wool (with TDX-90/TDX-140 support washers)
Concrete and masonry (substrate categories A to E)
New-build
Energy-efficient refurbishment

External thermal insulation products

You will also need:

Réf. LFM10180KLIMAS

LFM 10 hammer-in anchor, 180 mm – Mechanical fixing for external thermal insulation (ITE)

The LFM 10 anchor, 180 mm in length, is a mechanical hammer-in fastener, comprising a polyethylene body and a galvanised steel nail, designed for the supplementary fixing of insulation boards in external wall insulation systems. It is certified under European Technical Assessment ETA-17/0450.

Packaged in boxes of 200 pieces by the manufacturer Klimas France, it is suitable for insulation thicknesses of up to approximately 100 mm on new substrates, and helps to counteract wind suction forces on the insulated façade.

52,63 € Including VAT

43,86 € Excl. VAT - VAT 20,00%

How do you choose the right external insulation?

Stages of an ITE

Which fixing for which surface?

LFM 10 wall plug, 260 mm, with metal nail – Box of 100

Certified mechanical fixings to secure your external wall insulation systems

The LFM 10-260 hammer-in anchor, manufactured by Klimas France, is a mechanical fastener designed to complement the bonding of insulation boards in external thermal insulation systems. Comprising a body made of virgin polyethylene and a galvanised steel nail with a polyamide-sealed head, it minimises localised thermal conductivity at each fixing point. This anchor has been awarded European Technical Assessment ETA-17/0450, issued by the Deutsches Institut für Bautechnik, which certifies its mechanical performance on the main types of substrates found on façades: concrete, solid brick, hollow brick, aerated concrete and lightweight concrete. With a diameter of 10 mm, a 60 mm flange and an anchorage depth of 70 mm, the LFM 10-260 is suitable for insulation panels made of expanded polystyrene, extruded polystyrene or mineral wool, used in conjunction with a suitable support washer, for insulation thicknesses of up to approximately 180 mm in new-build projects. Its function is to absorb wind suction forces on the insulated façade, serving as an essential complement to the bonding of the panels, in accordance with the number of fixings per square metre specified in the thermal analysis of the external thermal insulation system (ETIS). Packaged in cardboard boxes of 100 pieces, this certified anchor is designed for façade contractors and external thermal insulation contractors, for both new-build and energy-efficient refurbishment projects.

Our ITE expert’s opinion

This 260 mm LFM 10 anchor, certified to ETA-17/0450, remains my go-to choice for mechanical fixing as a complement to adhesive bonding. Always calculate the required length using the ETA formula rather than estimating it; a sizing error here compromises the integrity of the entire external thermal insulation system.

External thermal insulation products

Products in the same category:

Réf. 209023

23 mm aluminium ITE starter rail

The 23 mm aluminium ITE starter rail enables an external thermal insulation project to get off to a smooth start. It ensures that thin insulation boards are held in place and aligned, whilst protecting the lower part of the façade.

7,88 € Including VAT

6,57 € Excl. VAT - VAT 20,00%

Réf. 405160

External thermal insulation mesh, 4×4 mesh, 160 g/m², CSTB-certified – 50 m² roll

The ITE mesh, with a 4×4 mm mesh size and a weight of 160 g/m², is a CSTB-certified fibreglass reinforcement designed to strengthen the base layer of external thermal insulation systems. Sold in rolls measuring 1,000 mm x 50 m (50 m²), it offers a tighter mesh and a higher weight per square metre than the standard mesh.

Its CSTB certification makes it the preferred solution for external thermal insulation systems requiring reinforced mesh, particularly in areas most exposed to mechanical stress.

56,14 € Including VAT

46,78 € Excl. VAT - VAT 20,00%

new

Réf. 100389

Unimat Façade Ultra BD 140 mm – Siniat graphite-coated EPS external wall insulation panel, R=4.50

The Siniat Unimat Façade Ultra BD panel, 140 mm thick, is a rigid, graphite-modified (grey) expanded polystyrene insulation board, ACERMI-certified, designed for external wall insulation (EWI) beneath render. Measuring 1200 x 600 mm, it has a thermal resistance of R = 4.50 m².K/W thanks to its thermal conductivity of 0.031 W/(m.K).

Lightweight and easy to cut, this panel is installed by gluing and/or fixing with dowels to masonry and concrete, in both new-build and energy-efficient renovation projects.

14,48 € Including VAT

12,07 € Excl. VAT - VAT 20,00%

new

Réf. 100397

Unimat Façade Ultra BD 220 mm – Siniat graphite-coated EPS external wall insulation panel, R=7.05

The Siniat Unimat Façade Ultra BD panel, 220 mm thick, is a rigid graphite-modified expanded polystyrene (grey) insulation board, ACERMI-certified, designed for external wall insulation (EWI) beneath render. Measuring 1200 x 600 mm, it has a thermal resistance of R = 7.05 m².K/W thanks to its thermal conductivity of 0.031 W/(m.K).

This considerable thickness makes it a preferred solution for projects aiming for a high level of energy performance, in both new builds and major refurbishments.

30,25 € Including VAT

25,21 € Excl. VAT - VAT 20,00%

new

Réf. 319430

Unimat Façade Ultra Opti 80 mm – Siniat graphite-coated EPS external wall insulation panel, R=2.50

The Siniat Unimat Façade Ultra Opti panel, 80 mm thick, is a rigid, graphite-enhanced expanded polystyrene insulation board, ACERMI-certified, designed for external wall insulation (EWI) beneath render. Measuring 1200 x 600 mm, it has a thermal resistance of R = 2.50 m².K/W thanks to its thermal conductivity of 0.032 W/(m.K).

Positioned as a cost-effective alternative to the Ultra BD range, it retains the qualities of graphite-modified expanded polystyrene (EPS), offering excellent value for money.

19,96 € Including VAT

16,63 € Excl. VAT - VAT 20,00%

Why choose the LFM 10 260 mm anchor with a metal nail?

Certified under European Technical Assessment ETA-17/0450, the LFM 10 guarantees verified mechanical and thermal performance, unlike a generic nylon anchor, whose characteristics for external wall insulation are not certified. The LFM 10 260 mm anchor with metal nail versus a standard, non-ETA-certified nylon anchor
ETA-17/0450 certification Not certified for external wall insulation (EWI)
Sealed head (thermal bridge break) Yes, polyamide Rarely
Quality traceability Klimas manufacturer’s guarantee Varies by supplier
Packaging Box of 100 pieces Varies

LFM 10 wall plug, 260 mm, with metal nail – Box of 100

Frequently asked questions about the LFM 10 260mm ankle

Belê, ew Xwedî Nirxandina Teknîkî ya Ewropî ETA-17/0450 e, ku ji aliyê Deutsches Institut für Bautechnik ve hatiye dayîn.

Li ser substratek nû bêyî qulkirinê, ev dirêjahî ji bo stûrahiya îzolasyonê ya nêzîkî 180 mm guncaw e, li gorî formula hesabkirinê ya ku ji hêla ETA ve hatiye destnîşankirin.

Ew ji bo panelên polîstîrenê ya berfirehkirî (EPS) û polîstîrenê ya ekstrudkirî (XPS), her weha ji bo hirîya mîneral guncaw e, bi şertê ku bi rondêleke piştgir a guncaw (TDX-90 an TDX-140) re were bikaranîn.

LFM 10 hammer-in anchor, 260 mm – Mechanical fixing for external wall insulation